Yaesu Fusion DR-1X - Wires-X C4FM/FM Digital Repeater

YAESU DR-1 144/430 Dual Band C4FM/FM Digital Repeater
Toronto Yaesu Fusion DR-1X - Wires-X C4FM/FM Digital Repeater

HRI-200 Setup

Next step is the config of the HRI-200.

    Copy what you see here.
    Press the “Write” button.
    Press the “HRI-200 Information” button which will read from the stored values in the HRI-200.

The goal is to ensure that the values in the left grayed out column agree with the values in the right white column.

Note the jury is still out on Pre-emphasis I currently have it off despite what the screen shot below indicates.
General Settings

The items on this page are not critical to getting the Repeater to play with Wires-X. I have included it to note that what does not work as expected. Joining rooms and the two DTMF commands do not announce if enabled on the Sound Settings page. From what I have read Wires attempts to send, however since the repeater is active locally the output audio is lost. This local takes precedence problem also causes issues with ID announcements, more in the next section.

http://morsetutor.com/2015/10/ysf-dr1x-and-wiresx-setup/4/