MMDVM DR1X Multimodde
Showing posts with label MMDVM ZUM DR-1X. Show all posts
Showing posts with label MMDVM ZUM DR-1X. Show all posts
MMDVM 1.0 ZUM DR-1x to DMR conversion
MMDVM 1.0 ZUM DR-1x to DMR conversion
Dr-1x to MMDVM DMR how to in detail with Zum board 1.0
A really good video on setting up the DR1X with a Rev1.0 board
Matt
Dr-1x to MMDVM DMR how to in detail with Zum board 1.0
A really good video on setting up the DR1X with a Rev1.0 board
Matt
MMDVM Repeater Install, What's That? DMR DSTAR C4FM
MMDVM Repeater Install, What's That? DMR DSTAR C4FM
Converting my Yaesu DR-1X to a DMR Repeater
Converting my Yaesu DR-1X to a DMR Repeater
This is a higher resolution video about my Yaesu DR-1X conversion to a DMR Repeater
This is a higher resolution video about my Yaesu DR-1X conversion to a DMR Repeater
Install a remote Reset for the Yaesu DR1X digital repeater
Install a remote Reset for the Yaesu DR1X digital repeater
connect Yaesu DR1 with MMDVM cabling
I want to connect DR1 with MMDVM. Just wondering about the connection
because I have seen already three of them. For example this one: I'd like to be sure for 100% before cabling. Can I go ahead with your cabling version?
Modifying the Yaesu DR1 Repeaterfor use on Allstar
Modifying the Yaesu DR1 Repeaterfor use on Allstar
Introduction
The Yaesu Fusion DR1 repeater was released in the spring of 2014 and was offered to amateur radio clubs and organizations for free. Since then an updated DR1X repeater has been released and Yaesu offered DR1 owners an upgrade to it for a nominal fee. The DR1 was considered a beta product and many mostly minor deficiencies were corrected in the newer product. I have no idea how many of these are out there but Yaesu was practically giving them away like candy so it is likely that you might already have one or have an opportunity to acquire one in the future.
Introduction
The Yaesu Fusion DR1 repeater was released in the spring of 2014 and was offered to amateur radio clubs and organizations for free. Since then an updated DR1X repeater has been released and Yaesu offered DR1 owners an upgrade to it for a nominal fee. The DR1 was considered a beta product and many mostly minor deficiencies were corrected in the newer product. I have no idea how many of these are out there but Yaesu was practically giving them away like candy so it is likely that you might already have one or have an opportunity to acquire one in the future.
Yaesu Fusion Repeater on D-STAR
Yaesu Fusion Repeater on D-STAR
Instructions
Important: Use only Compass Linux images and dstarrepeater packages. They contain support specific to the UDRC™. Source is available for review on GitHub.
During initial startup do not modify the basic Raspberry Pi setup. For example, do not overclock the Raspberry Pi, it is not needed as performance is more than adequate, and doing so can change clocking values on busses used by the UDRC™ causing it to either not function or be unstable. If you make any changes not listed in these instructions, and your UDRC™ does not function, return to the original settings.
Instructions
Important: Use only Compass Linux images and dstarrepeater packages. They contain support specific to the UDRC™. Source is available for review on GitHub.
During initial startup do not modify the basic Raspberry Pi setup. For example, do not overclock the Raspberry Pi, it is not needed as performance is more than adequate, and doing so can change clocking values on busses used by the UDRC™ causing it to either not function or be unstable. If you make any changes not listed in these instructions, and your UDRC™ does not function, return to the original settings.
MMDVM DMR DSTAR Repeater Maker
MMDVM DMR DSTAR Repeater Maker
This is a board that you can use to make a Home Brew DMR or Dstar Repeater! Open Source Multi-Mode Digital Voice Modem
This is a board that you can use to make a Home Brew DMR or Dstar Repeater! Open Source Multi-Mode Digital Voice Modem
Yaesu DR1X easy remote reset modification
Yaesu DR1X easy remote reset modification
Supplies:
Commspec TS-64 CTCSS or DCS-23 *DCS Decoder board SPDT 12 Automotive relay 30A
SPDT Relay Harness
Heat shrink tubing
Wire ties
3M Automotive double sided tape Solder
Wire Cutters
Philips and a small flat head screw driver Soldering Iron
*-Used in this modification & instructions
Confident proficiency to accomplish this task is MADNITORY, DO NOT ATTEMPT & get help from someone else if you are unsure of your abilities.
Supplies:
Commspec TS-64 CTCSS or DCS-23 *DCS Decoder board SPDT 12 Automotive relay 30A
SPDT Relay Harness
Heat shrink tubing
Wire ties
3M Automotive double sided tape Solder
Wire Cutters
Philips and a small flat head screw driver Soldering Iron
*-Used in this modification & instructions
Confident proficiency to accomplish this task is MADNITORY, DO NOT ATTEMPT & get help from someone else if you are unsure of your abilities.
Install a remote Reset for the Yaesu DR1X digital repeater
Install a remote Reset for the Yaesu DR1X digital repeater
Repeater Controllers and Repeater Systems
Repeater Controllers and Repeater Systems
ADR Interface
The ADR Interface allows the connection of an external repeater controller to the Yaesu DR-1x Fusion Repeater while still retaining the automatic mode selection capability of the repeater. The DR-1x only allows the use of an external controller for analog operation of the repeater however.
While the ADR was designed for use with our RC210 in mind, it will work with any repeater controller on the market.
Need for the interface
ADR Interface
The ADR Interface allows the connection of an external repeater controller to the Yaesu DR-1x Fusion Repeater while still retaining the automatic mode selection capability of the repeater. The DR-1x only allows the use of an external controller for analog operation of the repeater however.
While the ADR was designed for use with our RC210 in mind, it will work with any repeater controller on the market.
Need for the interface
S-Cooling dr1x-interface
Microcontroller interface to control operating modes of the Yaesu DR-1X Repeater.
Purpose
Allows remote control of the Yaesu DR-1X Repeater. PTT and operating mode can be controlled remotely via a USB virtual serial port. The squelch input can be sensed using the same serial line.
The code samples the SQL pin and sends information about state changes to the computer. It also sequences outputs for the EXT I/O, MODE, and PTT pins when commanded to.
Purpose
Allows remote control of the Yaesu DR-1X Repeater. PTT and operating mode can be controlled remotely via a USB virtual serial port. The squelch input can be sensed using the same serial line.
The code samples the SQL pin and sends information about state changes to the computer. It also sequences outputs for the EXT I/O, MODE, and PTT pins when commanded to.
DR1X Tutorial
This tutorial runs over how to get the DR1X repeater configured for D-STAR operation once you have your Raspberry Pi up and running.
MMDVM How two Video! DSTAR DMR Repeater Build
MMDVM How two Video! DSTAR DMR Repeater Build
Question : Are you changing a Fusion system to TX in TDMA, or are you just adding a peripheral repeater with the MMDVM that's connected to the system fusion repeater?
Answer : Using the analog side of the DR-1 to connect to a MMDVM.. So now I have a C4FM, DMR, DSTAR Repeater.
Question : Are you changing a Fusion system to TX in TDMA, or are you just adding a peripheral repeater with the MMDVM that's connected to the system fusion repeater?
Answer : Using the analog side of the DR-1 to connect to a MMDVM.. So now I have a C4FM, DMR, DSTAR Repeater.
DR1x Squelch Alignment Procedure
DR1x Squelch Alignment Procedure
Internal System Alignment Routine This uses a programmed routine in the transceiver which simplifies many previously complex discrete component settings and adjustments with digitally-controlled settings via Microphone buttons. To enter the Alignment mode: Connect the PANEL-UNIT to TX-MAIN-UNIT and RX-MAIN-UNIT. Press and hold in the [D(X)] and [DISP)] keys while turning the transceiver on. The transceiver is now in the "Transceiver mode". Press and hold in the [POWER(LOCK)] key for two seconds. Press and hold in the [F(MW)] and [GM)] keys while turning the transceiver on. Press the [POWER(LOCK)] key. "LOCK" will appear in the display. Press the keys of the Microphone in the following sequence. [0] . [3] . [4] . [0] . [3] . [4] Press the [POWER(LOCK)] key. "UNLOCK" will appear in the display. The transceiver is now in the "Alignment mode".
Subscribe to:
Posts (Atom)